|Rotating speed||30000 rpm|
|Rotating direction||Rotate anticlock wise from the shaft extension end|
|Tool holder||IS020 (Parfaite is recommended)|
|Blind rivet||IS020-15° (Parfaite is recommended)|
1: Power line: Three-color lines connected with U, V and W phases/ yellow and green wires grounded
Temperature control line 110°C thermistor two-phase connected with the temperature-control protector
2: Cooling water feed: Pump lift 8m
3: Pole change and dust removal pressure: 0.2-0,3Mpa (6/4 hoses)
4: Quantity of proximity switches: Pole hanging and pole discharge NPN (normally open) N.O.
Wiring method of the proximity switch: Brown wire connected with +24VDC blue wire connected with 0VDC
Signal load end connected with +24VDC/the other end connected with the black wire
5: Air seal pressure: 0.1-0.2Mpa (4/2 hoses)
6: Cooling water: yielding (2 and 6 ends terminated with 8/6 hoses)
7: Air inlet pressure: of the cylinder 0.65Mpa (6/4 hoses)
|PTC single-core thermistor parameter|
|DC power supply||Maximum DC25V/100mA|
|110℃||Rated operating temperature|
|≤160℃||Maximum storage temperature|
The electric main shaft shall be installed at the clamped position; otherwise, the bearing will be easily damaged!
The main shaft shall entirely stop before the tool changing. The manual tool changing button shall not act during the rotation of the shaft; otherwise, it will easily result in the seizure of the shaft!
The compressed air shall be clean and dry, and the filter accuracy shall be 0.1micron! Air seal is normally open. It is recommended to use the two-level filter, and the filter accuracy is 0.5 micron/ 0.1 micron respectively. The air filter is installed with the self-discharge device.
We accept PayPal, Escrow, Credit Card, T/T, Western Union, WebMoney Qiwi wallet and Brazil Boleto.
We send goods within 1-7business days after receiving the payment.
Orders will be canceled if payment is not received within 10 days of purchase.
All the products NEWCARVE selling default FOB trading terms. If you have special requests about the declaration, please leave messages to us when you make an order.
All packages to Brazil need CPF number by DHL/UPS/FedEx/EMS.
All packages to Argentina need CUIT number by DHL/UPS/FedEx/EMS.
All packages by Chile need RUT number by DHL/UPS/FedEx/EMS.
All packages to Russia need the Full Name(First name + Mid name + Last name).
Please make sure your address is correct to avoid paying extra shipping costs.
1. All items sold are brand new.
2. Received a wrong item/Defective item: please give us the photo and e-mail us within 7 days from the date you receive the product.
3. Exchanitem: please returned within 7 days from the date you receive the product, the buyer pays shipping fees. Items must be in their original condition, not worn, or altered. We will not reimburse the return shipping.
Once you have received your item, please leave feedback for us as this will inform us that you have received your items.
1. Your positive feedback and 5 Star ratings: after you receive your order, we will give you positive feedback.
2. Before giving neutral or negative feedback: please contact us immediately, so that we can satisfactorily address your concerns.