1. Flexible illumination angle adjustment: Vertical Rotation Angle:﹣7° to 90° Horizontal Rotation Angle: 360°
2. Dot-matrix LCD panel with clear and convenient operation. Based on rigorous optical research and design, producing uniform light distribution
and the same brightness on four corners. Follow the pace of the original plant and the software can be upgraded.
3. In M manual flash mode, this flash can function as an optic S1 secondary flash with optic sensor.
With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects.
The flash can also function as an optic S2 secondary flash with optic sensor in M manual flash mode. This is useful when cameras have pre-flash function.
With this function, the flash will ignore a single "preflash" from the main flash and will only fire in response to the second, actual flash from the main unit.
Compatible cameras: for Canon/Nikon/Sony/Fuji/Olympus cameras (E-TTL II autoflash)Support for the cameras that have PC sync socket.
Power supply: 2*AA batteries
Flash Exposure Control: TTL II
Manual flash: Yes
Second-curtain sync :Yes
Flash exposure compensation: Yes. ±3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera
ZOOM setting: Adjust the ZOOM value by the transmitter
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last
Transmission range (approx.): 0-100m
Wireless ID: 01-99
Display:Large LCD panel, backlighting ON or OFF